4 Pairs Unshielded Twisted Pair (UTP) Cable
Conductor Metal: Bare Copper
Color Code: Gray
Conductor: 24 AWG
Insulation Material: HD-PE
Jacket Material: PVC UL94V-0
Heat-resistant: 60oC minimum (Temperature limited) Flame property: The purpose of the vertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.
D-Link Cat6 UTP Patch cord 1m Grey Colour
KSh230.00
- 4 Pairs Unshielded Twisted Pair (UTP) Cable
- Conductor Metal: Bare Copper
- Color Code: Gray
- Conductor: 24 AWG
- Insulation Material: HD-PE
- Jacket Material: PVC UL94V-0
- Heat-resistant: 60oC minimum (Temperature limited)
- Flame property: The purpose of thevertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.
Related products
Siemon Cat 6 UTP 5m Patch Cord
Siemon Cat 6 UTP Patch Cord delivers category 6 performance with a reduced cable diameter for improved airflow and increased flexibility in high-density patching areas.
Cat 6 Siemon UTP Patch Cord smaller 28 AWG stranded copper construction offers a significantly tighter bend radius for easier cable routing and enhanced cable management,
CAT6,CAT7 RJ45 SINGLE FACEPLATE
Cat6 Ethernet UTP 15m Patch Cord
Giganet Cat 6 5M UTP patch cords
D-Link Cat6 UTP Patch cord 3m Grey Colour)
- 4 Unshielded Twisted Pair (UTP) Cable
- • Metal Conductor: made of solid copper
- • Color Code: gray
- • Patch Cord Cable Length of 3 Meters
- • Maximum Data Transmission: 1 Gbps
- • 24 AWG Conductor Size
- • Insulation Material: HD-PE
- • Cable Protective Jacket Material: PVC UL94V-0
Cat6 Ethernet UTP 1m
This patch cords are widely used in any cabling system and are designed to connect communication lines with active network equipment through patch panels, as well as to connect computers in workplaces to patch outlets. They provide high reliability of the connection and allow, if necessary, to quickly re-connect. Patch cords consist of a segment of a multicore patch cable terminated with RJ45 / 8P8C connectors, correspond to category 6 (250 MHz) and are intended for use in communication lines with a data transfer rate of up to 10 Gb/s. The cable routing in the patch cords is made according to the T568B standard. The connector mounting location in the NETLAN cords is protected by a filler cap, which significantly increases the life of the patch cord.
Cat6 Ethernet UTP 10m Patch Cord
RJ45 CAT6A STP CONNECTOR
Cat t6a RJ45 modular plug is perfect for terminating cat6a solid cables. These modular plugs are manufactured from high-impact clear polycarbonate to withstand everyday wear and tear, and the contacts are 50 micron gold for optimum signal transmission.
Singlemode SC to SC Fiber Optic Patch Cord 3M
Single Mode Patch Cords
Cable Jacket: PVC/LSZH
Duplex connectivity
Available Lengths:3M
Connectors Types: SC
Siemon 10G Cat 6A 3M patch cord
Cat6 Ethernet UTP 20m Patchcord
Singlemode SC to SC Fiber Optic Patch Cord 1M
Singlemode SC to SC Fiber Optic Patch Cord 1M
CONNECTORS | SC to SC |
---|---|
FIBER CORE | OS1 9/125 Singlemode |
COLOR | Yellow |
JACKETING | Riser Rated (OFNR) |
FIBER TYPE | Simplex |
LENGTH (METERS) | 20m |
CABLE DIAMETER | 2.0mm |
POLARITY | Type A to B Crossover (Most Common for Duplex Patchcords) |
ATTENUATION | 1310 nm: 0.25 dB/km or at 1550 nm: 0.35 dB/km |
STANDARDS | Attenuation tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 |
ENVIRONMENT | Operating Temperature: -20°C to +70°C |
COMPLIANCE | RoHS / ELV |
MANUFACTURER | CableRack |
Reviews
There are no reviews yet.