KSh150.00
KSh3,500.00
BNC CONNECTOR (PACK OF 5)
Rated 0 out of 5
(0)
Highlights:
- Weld-free design for easy to connect with cable
- Make custom length video cables for home theater, broadcast video and CCTV
- Soldering free with screw terminal lock and insolating tube for easy stable DIY connection
- For Coaxial RG59 CCTV Came
KSh350.00
KSh30.00
Cable Butting Tool – Cable Stripper
Rated 0 out of 5
(0)
KSh100.00
Cable Tracer
Rated 0 out of 5
(0)
Highlights:
- Easy to operate and smooth appearance.
- Flexible interface,wide application.
- Portable and easy to carry.
- Indicator and sound reminding
- Light touch switch,saving energy and power
KSh4,000.00 KSh5,000.00
Cat6 Ethernet UTP 10m Patch Cord
Rated 0 out of 5
(0)
KSh260.00
Cat6 Ethernet UTP 15m Patch Cord
Rated 0 out of 5
(0)
KSh380.00
Cat6 Ethernet UTP 1m
Rated 0 out of 5
(0)
Highlights:
This patch cords are widely used in any cabling system and are designed to connect communication lines with active network equipment through patch panels, as well as to connect computers in workplaces to patch outlets. They provide high reliability of the connection and allow, if necessary, to quickly re-connect. Patch cords consist of a segment of a multicore patch cable terminated with RJ45 / 8P8C connectors, correspond to category 6 (250 MHz) and are intended for use in communication lines with a data transfer rate of up to 10 Gb/s. The cable routing in the patch cords is made according to the T568B standard. The connector mounting location in the NETLAN cords is protected by a filler cap, which significantly increases the life of the patch cord.
KSh100.00
Cat6 Ethernet UTP 20m Patchcord
Rated 0 out of 5
(0)
KSh500.00
Cat6 Ethernet UTP 3m
Rated 0 out of 5
(0)
Highlights:
This patch cords are widely used in any cabling system and are designed to connect communication lines with active network equipment through patch panels, as well as to connect computers in workplaces to patch outlets. They provide high reliability of the connection and allow, if necessary, to quickly re-connect. Patch cords consist of a segment of a multicore patch cable terminated with RJ45 / 8P8C connectors, correspond to category 6 (250 MHz) and are intended for use in communication lines with a data transfer rate of up to 10 Gb/s. The cable routing in the patch cords is made according to the T568B standard. The connector mounting location in the NETLAN cords is protected by a filler cap, which significantly increases the life of the patch cord.
KSh250.00
Cat6 Ethernet UTP 5m
Rated 0 out of 5
(0)
Highlights:
| Execution |
Unshielded |
| Category |
6 |
| Bandwidth, MHz |
250 |
| Cable type |
UTP |
| Connector Type |
2xRJ45 / 8P8C |
| Wiring diagram |
Both ends according to T568B standard |
| Protective cap |
Jellied, with latch protection |
| Conductor type |
Stranded |
| Diameter of conductor insulation, mm |
26 AWG (7×0.160 ± 0.1) |
| Insulation material |
Polyethylene (PE) |
| Outer sheath material |
Polyvinyl Chloride (PVC) |
| The diameter of the outer shell, mm |
5.6 ± 0.3 |
| Colour |
Gray |
| Length, m |
0.5 1 1,5 2 3 5 |
| Compliance |
Complies with standards: ISO / IEC 11801, EN 50173 and TIA / EIA-568 |
| Supported Applications |
10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, |
| Temperature range, С |
Storage – from -20 to +60.Operation – from -20 to +50 |
| Guarantee |
1 year |
| Packaging |
Individual – plastic bag |
KSh380.00