D-Link CAT6 UTP Cable 300M NCB-C6UGRYR-305/3xx Ethernet Cable Roll
Rated 0 out of 5
(0)
Highlights:
4 Pairs Unshielded Twisted Pair (UTP) Cable
• Conductor Metal: Solid Bare Copper
• Color Code: Gray
• Conductor Diameter: 0.560mm Nominal, 23 AWG
• Insulation Diameter: 0.970mm Nominal, Insulation Material: HD-PE
• Jacket Material: PVC UL94V-0/LSZH
• Cable Diameter: 6mm Nominal
• PE Central Cross separator
KSh17,825.00
D-Link Cat6 UTP Keystone Jack
Rated 0 out of 5
(0)
Highlights:
- RJ45 8P 8C 180?C 50u Punch Down Jack.
- Terminating 4 pairs, 22-26 AWG Cable.
- Universal labels color coded for T568A and T568B wiring schemes.
- Fitting high density keystone panel.
KSh290.00
D-Link Cat6 UTP Patch cord 1m Grey Colour
Rated 0 out of 5
(0)
Highlights:
- 4 Pairs Unshielded Twisted Pair (UTP) Cable
- Conductor Metal: Bare Copper
- Color Code: Gray
- Conductor: 24 AWG
- Insulation Material: HD-PE
- Jacket Material: PVC UL94V-0
- Heat-resistant: 60oC minimum (Temperature limited)
- Flame property: The purpose of thevertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.
KSh230.00
D-Link Cat6A utp 24AWG,PVC,305m,LBU
Rated 0 out of 5
(0)
Highlights:
UTP CAT6 cable measuring 350M which is used for voltages below 80 Volts in blue, very well used for your network devices. This cable also meets CAT6 Cable specifications that can provide speeds up to 1000 Mbps.
KSh20,125.00
D-Link Crimping Tool
Rated 0 out of 5
(0)
Highlights:
D-link Crimping tools form an essential ingredient for any kit that is required by service personnel. The structured cabling system lays stress on following the practices which will add elegance, discipline, method and reliability to cabling. The tools which are used in installation of a cabling system go a long way in and can sustain extensive use in the field. Modular Crimping Tool can be used to crimp RJ-45 and RJ-11 types of connectors.
KSh1,850.00
D-Link DEM-310GT SFP
Rated 0 out of 5
(0)
KSh5,550.00
D-LINK DES-1210-28P SWITCH
Rated 0 out of 5
(0)
Highlights:
- 24 x 10/100BASE-TX PoE + 2 x 10/100/1000BASE-T ports
- 2 x 10/100/1000BASE-T/SFP Combo ports
- Supports IEEE 802.1p QoS
- CoS by DSCP/ToS/TCP/UDP/IPv6 traffic class
- Bandwidth Control
- Auto Surveillance VLAN
- Auto Voice VLAN
- Cable Diagnostics
KSh33,000.00
D-Link DES-F1006P-E/B 6-port Fast Ethernet Unmanaged Long Range 250m PoE+ Surveillance Switch with 4 PoE ports
Rated 0 out of 5
(0)
Highlights:
Features
Superior connectivity
- 4 10/1 0OMbps Fast Ethernet ports
- 2 10/1 0OMbps uplink port
- 60 watts available for PoE
- Flow control for protection against data loss
- The maximum distance of 250m
Standards
- IEEE 802.3 1 0BASE-T Ethernet (twist-pair copper)
- IEEE 802.3u 1 00BASE-TX Fast Ethernet (twisted
- pair copper)
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet
Easy to Use
• Plug-and-play installation
• IEEE 802.3x Flow Control
• Auto MDI I MDIX crossover for all ports
Fanless device
KSh6,000.00
D-Link DES-F1010P-E /E
Rated 0 out of 5
(0)
Highlights:
DES-F1010P-E
- 8 x 10/100 Mbps Fast Ethernet PoE+ Ports
- 2 x 10/100 Mbps Uplink Ports
- PoE+ support – up to 30W per port
- Long Reach PoE support – up to 250m
- Smart Features: Extend, VLAN, QoS and PoE Reset
- Lightning protection built-in (6kV)
- PoE Budget 96 Watts
- Plug & Play Installation
KSh9,000.00
D-Link DES-F1010P-E/B 10-port Fast Ethernet Unmanaged Long Range 250m PoE+ Surveillance Switch with 8 PoE ports
Rated 0 out of 5
(0)
Highlights:
DGS-F1010P-E features eight 10/100/1000 BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30 W on each PoE port up to 250m and providing a total power budget of 96 W. You can connect compatible devices to the DGS-F1010P-E without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets.
High PerformanceThe DGS-F1010P-E features plug-and-play installation and requires no configurations. Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-F1010-E maximizes network performance while minimizing the transmission of bad network packets.
The D-Link DGS-F1010P-E 10 Port 10/100/1000 Switch with 8 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DGS-F1010P-E is compact and operates silently making it ideal for most rooms and offices Power over Ethernet
Technical Specifications
| Brand | D-Link |
| Model Name | PoE Switch |
| Model No. | DGS-F1010P-E |
| RJ45 Ports | port 9~port 10 |
| Dimensions | 84 x 94 x 27mm |
| Weight | 1.05kg |
| Performance | Bandwidth: 20 Gbps (no block), Network delay (100 to 100M bps): maximum 20 ?s (using 64byte packet), Frame filtering and transmission rate, 10M: 14,800pps, 100M: 148,800pps, 1000M: 1488,00pps |
| Warranty | 1 Year |
KSh13,700.00